Transmission devices Continously Variable Transmission (CVT) is an essential component for automatic scooter type motorcycle (scooter). This device has a function of the engines deliver power to the wheels.
How To enhance Acceleration of automatic scooter
So even if you want a motor scooter pet you are able to accelerate quickly and reach a top speed or top speed. Then the device is mandatory to receive attention, especially the roller and the V-belt.
"Scooter with high acceleration is perfect for traveling in city traffic jams and stop and go nature,"
The reason is, when a low or slow acceleration, the motor fuel to be extravagant, the movement is not agile, and difficult to maneuver. Therefore, the motor is accelerating weight requires more fuel to produce more power.
"Because, like it takes the motor power doubled to maneuver like a traction motor mild acceleration," .
So what must be addressed? How? Here are following explanation.
1. Use a light roller
On a scooter roller serves to put pressure out on the variator so that components can be opened or give change a larger circumference to the diameter of the drive belt.
Along with changes in the circumference of the diameter, the V-belt pulley will move back and front. Therefore, the two pulleys are interconnected by using the V-belt.
Therefore, when wanting a high acceleration, it is advisable to use a lightweight roller. When the weight of standard roller used is 15 grams, then use the roller that weighs 13 grams. "Therefore, use the scooter belongs to another or custom components," .
However, if you want to achieve the highest speeds are advised to use a rather heavy roller. So, if you want a mild acceleration, but also get the highest speed you should use a roller with weights between standard and light weight, which is 14 grams.
2. Adjust V-belt tension
Belt or V-belt is served as an intermediary between the two pulleys. Front pulley or drive pulley serves to drive the rear pulley or driven pulley. Front pulley connected crutch-duty engines and accommodates as power from the engine.
The rear pulley is connected to the axle in charge of transferring engine power to the wheels. Both devices were interconnected by using the V-belt. Belt or V-belt that served as intermediaries between the two. That is, V-belt has a very important role.
"Meanwhile, the performance of V-belt is also very dependent on the performance or quality rollers and variator,"
Therefore, one thing you must do is maintain the level of V-belt tension. Strive to be V-belt is not in conditions that are too tight or loose.
When too tense or tight, then the engine crankshaft will have problems. Therefore, the V-belt interested in the engine rev hard though not too high. So even with the pulley.
Conversely, if loose, V-belt will be easily damaged or even broken. Along with the replacement of the roller, preferably V-belt tension level are at the optimum point. "So the acceleration is also much lighter,".
In addition, the V-belt with an optimum level of tension will not prevent the wasteful fuel scooter.
3. Clean the CVT system
It is advisable to check regularly traveled scooter CVT after 3-6 thousand miles. Perform service to the device after running 8-9 thousand miles.
Clean all the major components of the device from dirt, water, oil splashes. Therefore, the various elements that can enter the air circulation system CVT gap. Gap was deliberately made the plant to cool all components of the CVT after the motor is used.
"When the CVT is dirty, noisy but also leads to easy slip V-belt, pulley and roller will not work optimally,".
In addition, check whether the roller is still in good condition. If the device has been transformed into 'peyang', then it should be replaced. Therefore, a worn roller will not work optimally.
Instead, clean the rollers routinely using gasoline and a brush. In addition, provide lubrication, which is a special grease.
